The E100 HD looks exactly the same as the E100, from the outside, which is deliberate to make it an easy upgrade in previous designs. The E100 HD matches the standard E100 parameters close enough to just replace the driver in your current design. The main difference is in the high frequency, starting from 3Khz and up. As shown in the impedance curve comparison below, the HighFrequency impedance has been vastly improved, giving the E100 HD a very open, 3 dimentional, dynamic and detailed HF response. The E100HD is an outstanding performer in a single driver system and due to the simplicity, not having to use complex filters, it’s easy to build your own HighEnd speaker system system in many different applications.
NEW: All new E100 drivers will now come with individual factory parameters!
Parameters
Thiele/Small Parameters, (8 ohm)
Title: Measured Parameters
Method: Fixed-Mmd (6.300 grams)
DCR mode: Fixed (5.48 ohms)
Area (Sd): 78.58 sq cm
Series resistance: 75.00 ohms
Stimulus level: 3.83 volts
SPLref reference impedance: NONE
Large units (volume = liters, mass = grams)
50.11 ”Fs Hz”
5.490 ”Re Ohms”
1.90 ”Qms ”
0.70 ”Qes ”
0.51 ”Qts ”
0.07 ”L1 mH”
0.26 ”L2 mH”
12.44”Vas(Sd) liters”
6.694 ”Mms(Sd) grams”
1435 ”Cms(Sd) æM/Newton”
4.12 ”Bl(Sd) Tesla-M”
87.28 ”SPLref(Sd) dB ”
0.035 ”Rub-index ”
X-max +/- 4.5mm (9 m.m. p-p)
Power 60W cont. 100W Max.In music
Brochure
